Rapid Set Stucco Patch

22.09.2019
61 Comments
Rapid Set Stucco Patch Rating: 6,4/10 3171 reviews

PRODUCT DESCRIPTION: Rapid Set® Stucco Patch is a durable, fast setting patching material for stucco repair. When mixed with water, Stucco Patch produces a rich, easy to apply mixture with excellent bonding characteristics. Stucco Patch is formulated with a premium grade hydraulic cement, high performance water-soluble polymers, and high quality aggregates. Stucco Patch is specially formulated to provide a simple, user friendly application that can easily be textured to match a variety of stucco surfaces. Stucco Patch can be painted as soon as it is dry to provide a one-hour stucco repair solution.

  1. Rapid Set Stucco Patch Smooth
  2. Rapid Set Stucco Patch Sds

Stucco Patch. Rapid Set ® Stucco Patch: Stucco Repair Material. For stucco repair projects requiring a durable, fast-setting patching material, Rapid Set® Stucco.

  • This link since your browser does not support frames. Please visit this link since your browser does not support frames.
  • Title: Rapid Set Stucco Patch - Product Data Author: CTS Cement / Rapid Set Cement Products Subject: Product Data for Rapid Set Stucco Patch Keywords.

Due to the advanced non-shrink formulation, Stucco Patch can be used for full-depth repairs in a single application. USES: Stucco Patch is used for the repair of cracks, holes and voids in stucco surfaces. Stucco Patch is weather resistant, and can be used for exterior and interior stucco surfaces. Stucco Patch is compatible with most primers, paints, and topcoats.

COLOR:Off-white The final color of Stucco Patch and other cementitious materials may vary due to application techniques and environmental conditions. USING STUCCO PATCH: SURFACE PREPARATION: Remove all loose, unsound and contaminated stucco from the area to be patched. Open cracks to minimum 1/4' width. Surface should be free of materials that will interfere with bonding such as dirt, oil, paint, loose material or any other material that inhibits bonding.

In hot, dry, or windy environmental conditions pre-wetting of the surface to be patched may be necessary. MIXING: Stucco Patch can be mixed by hand or mechanical mixer. Add the measured amount of cool, clean water to the mixing bucket and slowly add the dry Stucco Patch while mixing. Mix to a uniform, lump free, consistency. Avoid over-watering. Clean mixing bucket and tools between batches. Do NOT re-temper.

PLACEMENT: Apply Stucco Patch to the repair area with a trowel or putty knife. Finish smooth and flush with the surface. Use a trowel, float or sponge to match the texture with the surrounding area.

Rapid Set Stucco Patch Smooth

Set

As soon as the material dries it may be primed and painted to match the surrounding area. TEMPERATURE: Warm temperatures will reduce the working time of Stucco Patch and cold temperatures below 70°F (21°C) will increase the working time. To adjust the setting time, use warm or cold mix water.

Stucco Patch should not be applied if surface or ambient temperature is below 45°F (7.2°C) LIMITED WARRANTY: CTS Cement Manufacturing Corporation warrants its material to be of good quality, and, at its sole option, within one year of sale, will replace defective materials or refund the purchase price thereof and such replacement or refund shall be the limit of CTS's responsibility. Except for the foregoing, all warranties, express or implied including merchantability and fitness for a particular purpose are excluded. CTS shall not be liable for any consequential, incidental, or special damages arising directly or indirectly from the use of the material.

CAUTION: Stucco Patch contains cementitious materials and may cause irritation to lungs, eyes, and skin. Avoid contact. Use only in adequate ventilation. Do NOT breathe dust. Wet mixture may cause burns.

Wear suitable gloves, eye protection and protective clothing. In case of skin contact, wash thoroughly with soap and water. In case of eye contact, flush immediately and repeatedly with large quantities of water and get prompt medical attention. In case of difficulty breathing, remove person to fresh air. If difficulty breathing persists, seek medical attention. Manufacturer:. CTS Cement Manufacturing Corporation.

11065 Knott Avenue, Suite A. Cypress, CA 90630. Ph. 800- 929-3030.

Fx. 714-379-8270. Web: www.rapidset.com. E-mail: info@rapidset.com.

Set

Stucco ​Patch Material From Home Depot: Home Depot has a few different materials that are available to the public and carry a couple of products that other stores do not. Items will differ, depending on which store you go to, so ordering online is a good idea if your local store does not stock a particular item.

Stucco ​Patch Material From Lowes: Lowes and Home Depot carry some of the same products, so I won't mention them here, but will focus on the other products instead. Like The Home Depot, Lowes only carries certain items in particular stores or location, so call ahead before going in or simply order them online to eliminate unnecessary headaches. Rapid Set Patch Compound: This is a patch kit that is made by a company named Rapid Set and I am a fan of all of their products. They usually have additives in their products that speed up dry time, so you don't have to wait to finish a wall. Comes in a 25 pound sack/box.

Rapid Set Stucco Patch Sds

Has a work time of 20 minutes (ideal for smaller patches). Can be used in scratch, brown and finish coats.

Is colored gray, but is paintable, to match your existing color on the house Application:. Add water to dry mix in a bucket or wheelbarrow and mix thoroughly. Apply using a hawk and trowel.

Remember that this material has a working time of around 20 minutes, so only mix what you need, adding additional water will weaken the mix and can cause cracking to occur.